61% OFF DIY Jewelry Making Finding Kits, Platinum, 7x10mm, Hole: 2mm

DIY Jewelry Making Finding Kits, Platinum
Size:
Iron Ribbon Crimp Ends: about 7mm long, 10mm wide, hole: 2mm, 20pcs;
304 Stainless Steel Earring Hooks: about 20~22mm long, 21mm wide, 3mm thick, hole: 2mm; pin: 0.6mm, 20pcs;
Zinc Alloy Lobster Claw Clasps: about 6mm wide, 12mm long, hole: 1.2mm, 30pcs;
Brass Snap on Bails: about 6.5mm long, 6mm wide, 3mm thick; inner measure: 5x6mm; pin: 0.5mm, 20pcs;
Iron Screw Eye Pin Peg Bails: about 10mm long, 4mm wide, 1mm thick, hole: 2mm, about 100pcs, 10g;
304 Stainless Steel Eye Pin: about 22mm long, hole: 1.9x2mm, pin: 0.7mm, 80pcs;
Brass Crimp Beads: about 2mm in diameter, 1.2mm long, hole: 1.2mm, about 885pcs, 10g;
Iron Open Jump Rings: 4x0.7mm, inner diameter: 2.6mm, 10g;
Iron Open Jump Rings: 8x0.7mm, inner diameter: 6.6mm, 10g;
Iron Cord Ends: about 3 mm wide, 5.5~6mm long, hole: 1.2mm, about 234pcs, 7g;
Brass Rings: about 19mm in diameter, 8.5mm wide, 17mm inner diameter, 1pc.

Priced per 1 Set

Please Note: The color may be slightly different from the picture because of different display device.